How a Double Sided Tape Manufacturer Builds the Stack
A1 selection guide
How a double sided tape manufacturer sets carrier, coat weight and release liner against your load case, substrate and climate,…
Read the pageTechnical Guides on Engineered Adhesive Tape
Long-form guides written from the converting side of the table: how a construction is built, how a tolerance is set, how a quantity or a payment structure is actually derived. Each guide answers one question a purchasing engineer asks before the first order.
42 pagesWritten from our own production records
Topic
Double sided tape manufacturer
Ten Questions to Screen a Double Sided Tape Manufacturer
A2 buyer due-diligence checklist
Ten questions to screen a double sided tape manufacturer before you quote: owned machines, lot traceability, test method,…
Read the pageAcrylic or Rubber: How a Double Sided Tape Manufacturer Splits the Choice
A3 comparison / substitution decision
A double sided tape manufacturer compares acrylic and rubber constructions on heat, UV, creep and initial tack, and says when…
Read the pageTopic
Minimum order quantity
MOQ for Custom Die-Cut Adhesive Tape: The Three Numbers Behind It
A1 terms explained guide
Why MOQ for custom die-cut adhesive tape is set by material lot, tooling, matrix waste and release cadence, and what to send…
Read the pageDie-Cut Tape MOQ: 10 Checks to Send Before You Order
A2 procurement checklist
Ten questions on minimum order quantity for die-cut tape: material lot, tooling ownership, matrix waste, buffer stock, and who…
Read the pageTopic
Foam tape supplier
How a Foam Tape Supplier Matches Thickness to Stress
A1 selection guide
How a foam tape supplier chooses core thickness from 0.4 to 3.0 mm to spread stress, bridge a gap and hold a panel through heat…
Read the pageTen Checks That Test a Foam Tape Supplier on Consistency
A2 buyer due-diligence checklist
Ten questions that test a foam tape supplier on batch thickness, compression set, cure state and lot traceability, with the…
Read the pagePE or Acrylic Core: How a Foam Tape Supplier Splits the Two Routes
A3 comparison / substitution decision
A foam tape supplier compares PE and acrylic foam cores on peel, shear, aging, gap bridging and cost, and says when neither route…
Read the pageTopic
Lead time
Lead Time for Die-Cut Tape from China: Where the Clock Starts
A1 terms explained guide
How lead time for die-cut tape from China is built: the clock starts at drawing sign-off, then material arrival, tooling and the…
Read the pageLead Time for Die-Cut Tape from China: 9 Checks Before You Accept a Date
A2 procurement checklist
Nine checks that turn a quoted lead time for die-cut tape from China into dated commitments on material, tooling, cutting windows…
Read the pageTopic
Polyimide tape (PI high-temperature tape)
Polyimide Tape in Reflow Masking: Heat, Peel and Residue
A1 selection guide
What a reflow or wave profile asks of polyimide tape, how to test clean peel and residue, which grade numbers to read on the TDS,…
Read the pagePolyimide Tape Roll Acceptance: 10 Checks That Hold Lot to Lot
A2 procurement checklist
Ten checks on polyimide tape lots: the heat claim's test method, release force, thickness, slit edge, and the documents to demand…
Read the pagePolyimide Tape vs PET vs Crepe Masking: Which Heat Window Do You Need?
A3 comparison and substitution decision
Polyimide tape, high-temperature PET film tape and crepe masking tape compared by construction, temperature window, peel…
Read the pageTopic
Sample policy
What a Sample Policy for a Double Sided Tape Supplier Is Supposed to Prove
A1 terms explained guide
What a sample policy for a double sided tape supplier should put in writing: the three sample tiers, what each proves, the lot…
Read the pageDouble Sided Tape Sample Policy: Eight Evaluation Questions to Send Before You Order
A2 buyer due-diligence checklist
Eight questions on sample policy for a double sided tape supplier before anything reaches your line: tier, lot, test method,…
Read the pageTopic
Die cut tape supplier
Die Cut Tape Supplier Quotes: Files, Material and Volume
A1 selection guide
How a die cut tape supplier prices a part: drawing file, material and thickness, yearly volume, and the cutting route recommended…
Read the pageDie Cut Tape Supplier Due Diligence: 10 Checks Before Tooling
A2 procurement checklist
Ten due diligence checks for a die cut tape supplier: tooling ownership, waste matrix stripping, first-article reports, liner…
Read the pageHow a Die Cut Tape Supplier Chooses: Flat-Bed, Rotary, Laser or CNC
A3 comparison and substitution decision
Flat-bed, rotary, laser and CNC die cut tape routes compared by outline, material, volume and supply format, plus the checks that…
Read the pageTopic
Payment terms
Payment Terms for a First Order with a Chinese Tape Factory: How Risk Gets Split
A1 terms explained guide
How payment terms for a first order with a Chinese tape factory split risk between buyer and supplier: entity, currency,…
Read the pagePayment Terms Risk Checklist: Nine Questions to Settle Before a First Tape Order
A2 buyer due-diligence checklist
Nine questions on payment terms and risk before a first order with a tape supplier: entity, currency, milestone, documents,…
Read the pageTopic
Tape converter China
Tape Converter vs Raw Roll Supplier: Where the Work Happens
A1 selection guide
What separates a tape converter in China from a raw roll supplier: owned slitters, in-house lamination, tooling, and lot records…
Read the pageAudit a Tape Converter in China: Ten Checks Before You Tool
A2 buyer due-diligence checklist
Ten factory-audit checks for a tape converter in China: machine ownership, incoming lot numbers, station records, first articles…
Read the pageTape Converter or Trading Company: Which One Earns Your Order
A3 route comparison
Tape converter or trading company in China? Where the two differ on quotes, samples, liability and process change, and when a…
Read the pageTopic
FOB and CIF terms
FOB vs CIF Adhesive Tape Shipment: Where the Boundary Sits
A1 terms explained guide
FOB vs CIF adhesive tape shipment: where risk actually transfers, who books the vessel, what CIF insurance covers, and which…
Read the pageFOB vs CIF: Ten Questions to Put to a Supplier Before You Order
A2 procurement due-diligence checklist
Ten FOB vs CIF adhesive tape shipment questions to send a supplier before ordering: who books, what the policy covers, who pays…
Read the pageTopic
Custom die cut adhesive parts
Custom Die Cut Adhesive Parts From Only a Sample
A1 selection guide
Reverse custom die cut adhesive parts from a physical sample: what to measure, what a sample cannot tell you, and the drawing…
Read the pageCustom Die Cut Adhesive Parts: The Eight-Item Review
A2 buyer due-diligence checklist
Eight review items for custom die cut adhesive parts before tooling: thickness build, edge condition, release force, liner…
Read the pageCustom Die Cut Parts: Kiss Cut vs Full Cut vs Stamping
A3 route comparison
Kiss cut, full die cut or stamped blanks: how custom die cut adhesive parts differ by route, where each fits, and when not to buy…
Read the pageTopic
Export packaging
Export Packaging Specification for Tape Rolls: Every Field That Decides the Pack
A1 terms explained guide
An export packaging specification for tape rolls, element by element: core, winding direction, interleaving, edge protection,…
Read the pageExport Packaging Specification for Tape Rolls: Nine Audit Questions to Send Before You Order
A2 procurement due-diligence checklist
Nine questions for a supplier before you order against an export packaging specification for tape rolls: cores, winding, carton…
Read the pageTopic
Tape slitting service
Tape Slitting Service: Width, Tension and Roll Build
A1 selection guide
How a tape slitting service sets working width, rewind tension, core and unwind direction so a finished reel feeds an applicator…
Read the pageTen Checks That Prove a Tape Slitting Service Is Consistent
A2 buyer due-diligence checklist
Ten questions that show whether a tape slitting service records blade, tension, core and lot data on every reel, with the answers…
Read the pageSlit in House or Buy Narrow Rolls: Pricing Four Routes
A3 comparison / route decision
Toll converting, bought reels, your own line or converted parts: how a tape slitting service compares with the other ways to get…
Read the pageTopic
Masking & packaging tape supplier
Masking and Packaging Tape: Reading the Job Before the Grade
A1 selection guide
How a masking and packaging tape supplier reads tack, hold, residue and bake window across MOPP, cloth and crepe constructions…
Read the pageTen Checks Before You Choose a Masking and Packaging Tape Supplier
A2 buyer due-diligence checklist
Ten checks on a masking and packaging tape supplier: adhesive chemistry, gauge, adhesion method, bake dwell, low temperature,…
Read the pageMOPP vs Cloth vs Masking Tape: Three Constructions, Three Failure Modes
A3 comparison / route decision
MOPP, cloth and crepe masking tape compared on seam lift, residue, dwell, ultraviolet exposure, print and cost per closed carton,…
Read the pageTopic
OEM tape manufacturer / private label tape
Private Label and OEM Tape Programs: Who Owns What
A1 selection guide
A private label tape program moves construction, artwork, packaging and compliance ownership from converter to brand owner. Here…
Read the pagePrivate Label Tape Supplier Checklist: Who Issues What, and How You Audit It
A2 procurement due-diligence checklist
Ten due-diligence questions for a private label tape supplier, focused on who issues the compliance documents, in whose name, and…
Read the pagePrivate Label Tape vs Relabeled Branded Rolls: Where the Cost Sits
A3 comparison and decision
Private label tape or relabeled branded rolls? Where the cost sits in each route, what each one you own, and when buying a brand…
Read the pageTopic
Specialty tape (conductive and EMI shielding tape)
EMI Shielding Tape and Conductive Tape: Contact, Aging and Grounding
A1 selection guide
How to read an EMI shielding tape or conductive tape spec by contact resistance, substrate, environmental aging and edge quality,…
Read the pageEMI Shielding Tape Incoming Inspection: Sampling and Aging
A2 procurement due-diligence checklist
An incoming-inspection checklist for EMI shielding tape and conductive parts: joint sampling, contact resistance, environmental…
Read the pageCopper vs Nickel-Silver vs Aluminum: EMI Shielding Tape Carriers
A3 comparison and decision
Copper, nickel-silver and aluminum EMI shielding tape carriers compared by contact resistance, oxide behaviour, aging, cost and…
Read the pageAsk the question behind the page.
Send the part, the material and the market you sell into. We answer with what we can actually hold, and we say so in writing before tooling.