Automotive
Exterior trim, low-VOC interior, masking and label tapes for automotive manufacturing.
Automotive Security Labels & Identification Tapes
Tamper-evident, laser-through and durable identification materials for vehicle parts, glass, plates and assemblies exposed to heat, UV and washing.
Tamper evidenceUV and heat exposureDie-cut labelsGrade-specific documents
The problem
Why this application is difficult
A label on a vehicle part is not a office label. It has to survive UV, heat cycling, humidity, fuel, oil, pressure washing and, in some cases, deliberate removal. A material that looks correct in a catalogue can fail at the edge, leave adhesive residue or delaminate after a few months in service. The joint and the label construction have to be reviewed together.
Our approach
What we review before proposing a material
Substrate and surface review
We confirm the exact plastic, glass, painted metal or coated surface. Surface energy, contamination and curvature decide whether a standard label or a special construction is needed.
Tamper-evident construction
Where removal must be visible, we review the facestock, adhesive and destructible behaviour. The goal is a controlled failure mode, not simply high adhesion.
Laser-through and specialty materials
For glass identification and harsh environments, we propose laser-through tape or a durable film construction that holds the marking without interfering with the process.
Converting and validation
Labels are die-cut to the drawing, supplied on a liner suitable for your applicator, and sampled for your environmental and adhesion tests before production.
Typical constructions
| Application | Typical construction | Product family |
|---|---|---|
| Component and VIN labels | Durable film label with high-cohesion adhesive | Specialty tape |
| Glass identification | Laser-through glass tape | Specialty tape |
| Tamper-evident seals | Destructible or void-indicating construction | Specialty tape |
| Paint masking for badges and trim | High-temperature masking tape | Masking & packaging tape |
| Wire-harness identification | Cloth or film tape with printable surface | Masking & packaging tape |
Constructions are starting points. The final choice depends on the substrate, process, test standard and volume.
Applications
VIN and component identificationGlass and window markingsTamper-evident sealsPaint masking for emblems and trimWire-harness identificationUnder-hood and exterior labels
What you get
- Construction reviewed against the actual substrate and cleaning process
- Samples for heat, humidity and adhesion testing before approval
- Die-cut labels with liner and presentation matched to the line
- Batch traceability for converted parts
- Documents for the selected grade, not a generic certificate pack
FAQ
Can you match a label already used in production?
Often yes, but we need the current construction or a sample. We compare facestock, adhesive, liner and thickness, then propose a match and flag any difference that could affect approval.
Do you supply tamper-evident labels?
We can propose destructible and void-indicating constructions. The right choice depends on the surface, the removal method and how the failure must be visible. We confirm with samples.
Can labels survive engine-bay temperatures?
That depends on the grade and the actual temperature profile. Share the peak temperature, duration and substrate so we can shortlist materials and the tests to run.
Related
Industries and product families
Electronics & EMS
Display, battery, FPC and shielding tapes for consumer electronics and EMS assembly.
Specialty Tape
Easy-release, heat-reactive, low-VOC, medical IVD and laser-through glass tapes for demanding applications.
Functional Tape
Conductive, polyimide, aluminum foil and thermal tapes for grounding, shielding, insulation and high-temperature protection.
Masking & Packaging Tape
Masking, cloth, duct and MOPP tapes for painting, protection, bundling and carton sealing.
Die-Cut Parts
Custom adhesive parts from drawing to ready-to-install: flat-bed, rotary, laser cutting and kitting.
Send the drawing or the failed part.
A photo, the substrate and the test you need are enough for a first review.